Unique Features

• Meets or exceeds ANSI/AWWA C515 valve specification
• Meets or exceeds ANSI/AWWA C 550 Standards and ANSI/NSF 61
  
• AWWA standard turns per inch to open
  
• Gate wedge seats on valve body, not on pipe bottom
• Gate wedge does not come in contact with sharp cut edge of pipe
• Ductile Iron body with nominal 10 mil power coat epoxy inside and out
• 250psig (1273 kPa) Maximum working pressure
• Shell tested to 1000 psi, Gate tested to 500 psi
• Ductile Iron wedge totally encapsulated with EPDM molder rubber
• Triple O'ring seal stuffing box (two upper & one lower)
• 2" standard operating nut (Handwheel optional) NRS ( non-rising stem)
• Standard valve body installs on full range of pipe sizes and types (Steel, PVC, C900, CL, DI, AC)
• Made in the USA from start to finish
• Valve body permanently restrains the valve to the pipe
• The valve body can accept the Butterfly Cartridge in lieu of the gate assembly
• Hundreds of successful installs without a single malfunction (references available)
• The valve size is 4"-12" and other sizes available upon request

Benefits of each installation

• Installs and Repairs Under Pressure
  
• Reduces Costly Risks Associated with Shut Downs
  
• Reduces installation and restoration costs
  
• Provides instant isolation zones for security and peace of mind
• Reduces the costly risks associated with system shut down
• Eliminates backflow contamination, purging, bac-t hits
• Provides satisfied customers