Fields marked (*) and red are required

1. Email:*

2. Company Name:*

3. Person Requesting Quote:*

4. Cell:

5. Office Phone:*

6. Fax:

7. Billing Address:

8. Requested Date of Job:*

9. Location:*

10. Tap Quantity and Sizes:*

11. Materials to be Supplied:*

12. Linestop Quantity:

13. Bypass:

14. How Long Will Linestop Be in Place:*

15. Pipe Type and Size:*

16. Product in Pipe:*

17. Temperature:*

18. PSI:*

19. Indoor or outdoor:*

20. Above or Below Ground Height/Depth:*

21. Prevailing Wage County:*

22. Is this project under any kind of OCIP?:*

23. Accessibility:*

24. Special Instructions:

25. Solve The Math Equation Below:*
CAPTCHA Image
=
[ Different Image ]

Insert Valve Unique Features


  • Meets or exceeds ANSI/AWWA C515 valve specification
  • Meets or exceeds ANSI/AWWA C 550 Standards and ANSI/NSF 61
  • AWWA standard turns per inch to open
  • Gate wedge seats on valve body, not on pipe bottom
  • Gate wedge does not come in contact with sharp cut edge of pipe
  • Ductile iron body with nominal 10 mil power coat epoxy inside and out
  • 250psi (1273 kPa) maximum working pressure
  • Shell tested to 1000 psi, gate tested to 500 psi
  • Ductile Iron wedge totally encapsulated with EPDM molder ru*bber
  • Triple O'ring seal stuffing box (two upper & one lower)
  • 2" standard operating nut (Handwheel optional) NRS ( non-rising stem)
  • Standard valve body installs on full range of pipe sizes and types (Steel, PVC, C900, CL, DI, AC)
  • Made in the USA from start to finish
  • Valve body permanently restrains the valve to the pipe
  • The valve body can accept the Butterfly Cartridge in lieu of the gate assembly
  • Hundreds of successful installs without a single malfunction (references available)
  • The valve size is 4"-12" and other sizes available upon request
Valve Inserting Equipment Ready for A Job Insert valve completely installed on a section of pipe  Insert Valve Installed Completed and Successful

Installation Benefits


  • Installs and Repairs Under Pressure
  • Reduces installation and restoration costs
  • Provides instant isolation zones for security and peace of mind
  • Reduces the costly risks associated with system shut down
  • Eliminates backflow contamination, purging, bac-t hits
  • Provides satisfied customers

Specifications


Linestop Free Quote